Koolance TMS-EB200 Manuel d'utilisateur télécharger pdf

Hardware Installation

The TMS interface card can be installed into a PCI or PCI-Express slot (with the included L-bracket), or mounted into a 5.25” bay

(using the included tray). All communication occurs via an external or internal USB port, even when installed into a motherboard

slot. The TMS hardware board is powered by a direct 12V power supply connection.

First, power-down the computer and connect all necessary wires to the TMS card. DO NOT CONNECT THE USB CABLE TO

THE COMPUTER. The internal or external USB cable will be connected to the computer after software installation. If needed,

extension wires for fans and the pump are included with the TMS board.

Koolance TMS-200 Installation Guide v1.02

External USB Connection

Connection

Indicator

LED

Internal USB Connection

Temperature sensor

connections (#1 - 5)

Coolant ﬂ ow meter LED switch (INS-FM16

only): off, on, or pulse according to ﬂ ow rate

*Pump power connection:

*CAUTION: Only Koolance pump models PMP-400 and PMP-450 are

compatible with TMS-200. The PMP-400 is found in Koolance PC4-1000,

RP-1000, and TNK-400 series products. Other models (such as the PC2,

PC3, Exos-1/LT, etc.) may damage the TMS board or computer power

supply if connected.

**ATX pass-through wire: enables the hardware safety shutdown feature. Connect the

male ATX power lead from theTMS board to the computer chassis main power switch.

12V 4-pin Molex power

supply connection

Connect the other female ATX power lead to the

motherboard’s power switch connection (often

marked “PWRSW”, “PWSW”, or “PWBT”).

This is the connection that would normally

receive the chassis power switch lead directly.

INS-FM16 Coolant ﬂ ow meter

(sold separately)

INS-FM17 Coolant ﬂ ow meter

(sold separately)

**ATX Pass-through wire:

Fan power connections

(#1 - 3)

1 2 3 4

(sold separately) 1

Résumé du contenu

Page 1 - (sold separately)

Hardware InstallationThe TMS interface card can be installed into a PCI or PCI-Express slot (with the included L-bracket), or mounted into a 5.25” bay

Page 2

Koolance TMS-200 Installation Guide v1.022Expansion Board InstallationThe expansion board includes a standoff and two screws. Attach the standoff to

Page 3

Koolance TMS-200 Installation Guide v1.023Software InstallationAfter connecting all wires to the TMS board and mounting it within the computer case,

Page 4

After software installation, connect one USB cable to the TMS board. Either loop the external cable back to an available external port, or plug the in

Modèles reliés TMS-205 | TMS-200-R | TMS-200 |

Commentaires sur ces manuels

Pas de commentaire

Koolance TMS-EB200 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Koolance TMS-EB200. Koolance TMS-EB200 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés TMS-205 | TMS-200-R | TMS-200 |

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Koolance TMS-EB200