Koolance EXT-400SL-V2-R Manuel d'utilisateur télécharger pdf (Page 21)

Nozzles are designed to attach tightly. If you need to remove a hose for any reason,

it may not pull off easily, even after unscrewing the compression ﬁ tting.

Usually, a connection will come free by squeezing the hose on top of the nozzle

and pulling away. If this fails, cutting a small incision lengthwise (parallel) along the

nozzle should free it.

When a hose screw has been removed, it may have distorted the tubing beneath it.

This last portion (about 1cm, 7/16”) should be trimmed to ensure a perfect ﬁ t with

the next connection.

The tip should always be re-cut if you needed to remove the tubing with an

incision.

Connecting Exos Systems

Disconnecting Hoses

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Pas de commentaire

Koolance EXT-400SL-V2-R Manuel d'utilisateur Page 21