Koolance PC3-420SL Manuel d'utilisateur télécharger pdf (Page 17)

The liquid coolant in your system should be emptied for any of the below reasons:

1. To Keep it Clean - Koolance recommends replacing the liquid coolant once

every 12 months. The coolant should also be replaced if it becomes contaminated

or significantly changes color.

2. Upgrading Coolers - Whether you are adding or removing liquid coolers,

upgrades can be performed more easily with a dry system.

3. Shipping - Koolance recommends draining the liquid coolant if the system is to

be shipped or transported in a method other than by hand.

(NOTE: In situations #2 and #3 above, the liquid coolant can later be reused if

cleanly bottled.) Additional coolant may be purchased from your local Koolance

dealer.

Draining & Maintenance

Remove the tubing from a single cooler nozzle

connection within the chassis and hold it over a

1-Liter container.

Due to pressure variance, most of the liquid will

not fall out until the reservoir refill tap has been

unscrewed.

Filling & Maintenance

CAUTION: Because of the risk of leakage, Koolance recommends

removing computer hardware before draining your system.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Pas de commentaire

Koolance PC3-420SL Manuel d'utilisateur Page 17