Koolance PC2-901BW Manuel d'utilisateur télécharger pdf (Page 20)

15User Manual

Each cooler kit contains clamps to secure

tubing to the cooler’s nozzles. Thread a

clamp onto each tube before connecting it to

the cooler nozzle.

Attach by squeezing the tube while pushing

firmly over the nozzle. The tubing should

completely cover the nozzle.

If you are finding it difficult to connect some

tubes (such as to the CPU cooler), try

temporarily stretching-out the tube end by

inserting need-nose pliers.

Connecting Tubes

Continue connecting all of your

coolers in the system until there

are no longer any open tube ends.

Although it is most common for

tubing from the heat exchanger to

go directly to the CPU cooler,

liquid may circulate in either

direction through the coolers.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 53 54

Commentaires sur ces manuels

Pas de commentaire