Koolance PC2-901BW Manuel d'utilisateur télécharger pdf (Page 30)

25User Manual

Before securely clamping the coolers, you must cut appropriate lengths of tubing

with scissors to connect each device. If you are building a new computer system,

it may be easier to temporarily lay the motherboard and CPU inside the case to

better estimate the required amounts.

The Exos external (blue) tubing connects

to the first and last coolers in your

system. Standard (clear) tubing is used

in between each individual cooler.

Additional tubing has been included with

your system should you require it, and

more can be purchased from your

Koolance dealer.

With one of the connected

hoses, roughly estimate the

length you will need to your first

cooler (usually the CPU cooler),

and cut it.

Cut the second hose with enough

length to connect with the last

cooler that will be in your

system.

Using the standard clear tubing,

cut shorter pieces to link

between each individual cooler.

Cutting Tube Lengths

Reservoir Input

Heat Exchanger Output

Although it is most common for

tubing from the heat exchanger to

go directly to the CPU cooler, liquid

may circulate in either direction

through the coolers.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 53 54

Pas de commentaire

Koolance PC2-901BW Manuel d'utilisateur Page 30