Koolance PC2-901BW Manuel d'utilisateur télécharger pdf (Page 32)

27User Manual

Clamping

After every cooler is connected, you may tighten the clamps to secure them.

Clamping is done by positioning the reusable clamp just behind the cooler nozzle,

and slowly applying pressure on the adjustment lobe with pliers until it locks.

CAUTION: The clamp should be tightened behind the widened portion

of the cooler nozzle. Do not tighten a clamp over or on this nozzle

section, as damage may occur to the cooler.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 53 54

Pas de commentaire

Koolance PC2-901BW Manuel d'utilisateur Page 32